Leviathan - V2 (rear wiring) (CNC speed trigger M4/M16) - JeffTron

Professionally designed and microprocessor controlled mosfet with Bluetooth technology.
It adds new ways of firing, a smooth change in firing speed, piston pre-tensioning, active engine braking, low battery indication, statistics, ...
Everything is controlled via an application on the smartphone (iOS and Android).
Fully integrated device inside gearbox v.2 instead of the original trigger contacts.
Finished cabling adapted for the battery in the stock with a DeanT connector - there is no need to solder anything.

MAIN FUNCTION:
- Adds new firing modes independently for each switch position (SAFE - SEMI - AUTO)
- Adjustable dose shooting (range 2 - 20 rounds)
- Reducing the cadence pauses between shots. Thanks to this, the shot has a quick response to the press of the trigger, as with a sharp weapon.
- Adjustable force of active engine braking with the possibility of switching it off
- Piston pre-loading function for immediate firing in SEMI firing mode
- Shot delay function, when it is not possible to fire again for a certain time. It is for simulation of kickback or overcharging (range 0.1 - 4.0 s).
- Low battery indication for 2S - 4S li-pol and 3S - 4S li-fe
- Save parameters to profiles for fast loading
- Update fixes bugs and adds new features for the device
- The application displays the current battery voltage. The colored bar indicates its state of charge
- Error log shows errors recorded during the lifetime of Leviathan - V2
- Leviathan - V2 monitors the passing current, voltage and temperature to avoid damage if something bad happens
- Uses vibration and motor beeps in the stock for user signaling
- The setting change is immediately saved in Leviathan's memory - V2, so programming is not lost when disconnected from the smartphone or battery

CHOICE OF SHOOTING MODES:

Independent of switch position (SAFE - SEMI - AUTO)

- SAFE: does not respond when the shutter button is pressed.
- Semi: fires once when the shutter button is pressed.
- Semi / BurstX: short press fires once, hold to fire the selected dose.
- Double trigger: Fires once when the trigger is pressed and again when the trigger is released.
- BurstX: Fires a dose when the shutter button is pressed.
- BurstX / BurstY: short press fires burstX, long press fires sum of burstX + burstY.
- BurstX / Full: a short press of the shutter button fires burstX, a long press starts automatic firing.
- Full: the weapon fires until the trigger is released (AUTO).

TECHNICAL SPECIFICATIONS:
- Easy installation inside the v.2 gearbox, which is according to the switch concept designed by Tokio Marui
- In most cases, no modifications are required in the gearbox or Leviathan - V2
- For perfect timing of the shot, a microswitch closed with each revolution of the piston wheel is used
- The CNC trigger (included in the package) is equipped with a screw for its shorter operation. This can achieve a very fast shot after pressing the shutter button
- Thanks to advanced electronics, Leviathan - V2 can be used in a weapon with any common upgrade and cadence
- Complete cabling allows quick and easy installation in the weapon, it is long enough for all types of weapons with a battery in the back. There is no need to solder anything
- Power conductors with a cross-section of 1.5 mm2 (AWG16) with thin and rigid MPPE insulation, blue conductor with a cross-section of 0.34 mm2 (AWG22) with MPPE insulation
- The power conductors have an outer diameter of only 2.06 mm and a blue 1.24 mm
- The length of the wires between the end of the gearbox and the connector is 290mm
- Encapsulated in a varnish that protects the device against water damage
- For proper pre-cocking function, it is necessary to have a functional reverse latch in the gearbox
- Designed for all types of commonly used batteries up to 17 V (Ni-xx 8.4 - 12V, lipol 7.4 - 14.8V)
- The device increases the cadence of the weapon and the battery life compared to the original cabling in the weapon
- With active engine braking, the piston is not partially extended during firing, the spring is not tired by partial compression, the internal parts are not stressed
- For high-cadence weapons, active braking solves the problem of multiple shots in the semi-firing mode.
- The braking effect of the motor is strongest with a load motor with neodymium magnets
- Remove from the gearbox: the circuit breaker, the trigger, the trigger contacts and the trigger stop - with the Leviathan - V2 you will not need them.

PACKAGING:

• Leviathan - V2 module with complete cabling
• screw with washer for securing the device in the gearbox
• CNC trigger with adjustable operation
• Adjusting screw for setting the trigger operation
• Foam to secure the device in the gearbox
• Installation instructions

SAFETY WARNINGS:

• To install the device in a gearbox, you must have technical knowledge!
• Please read and follow all instructions to avoid damaging the device.
• A short circuit or incorrect connection of the battery will immediately cause damage to the device, which is not covered by the warranty. It can also ignite or explode the battery!
• Disconnect the battery when not in use! Otherwise, you will completely discharge the battery. The device still draws a small amount of current.
• Do not connect the battery if the weapon is aimed at you, another person or an animal!
• Do not modify, repair, prevent spillage or heat shock Leviathan - V2.