Mosfet II - JeffTron

Professionally designed mosfet without cabling designed for AEGs.
The device increases the cadence of the weapon and the endurance of the battery compared to the original cabling in the weapon

SPECIFICATIONS:
- Separate device without cables, for power circuit cables with max. Cross-section 1.5 mm2 can be used and for signal circuit with max. Cross-section 0.5 mm2
- Suitable for service centers, if you are not sure about soldering the wires to the board, choose the variant with cabling and accessories.
- Designed for springs up to M210 (corresponds to a current of 150A for a single shot or 50A firing dose for a maximum of 30s)
- Designed for all types of commonly used batteries up to 17 V (Ni-xx 8.4 - 12V, lipol 7.4 - 14.8V)
- 6-wire connection
- Device size 25x12x7mm
- The trigger contacts do not burn
- No quiescent current is being drawn
- Due to the principle of operation of the AEG weapon mechanism, the piston stops in a random position in AUTO mode
- For the correct function of this device, it is necessary to have a functional interrupter, switch slide, reversing latch, trigger and trigger stop (locked) in the gearbox, ie as in the standard gearbox

PACKAGING: equipment, tube and installation manual

WARNING: To install this device, you need an expert who must be able to solder and disassemble the AEG weapon. Never use a transformer solder!