Hop-Up chamber MAXX MI-SPORT for ICS CXP/CS4/EBB M4/M16 with LED - MAXX

CNC Hop-up chamber MI SPORT (with bb catch) is designed for electric weapons company ICS.

Thanks to the high quality and accuracy of production, it eliminates air pressure leaks and thus increases performance.

The HOP-UP pressure is set using a rotating wheel, which allows very fine adjustment of the HOP-UP system pressure.

The pressure straps and concave pressure are compatible with R-hop, Flat-Hop and Standard-Hop rubber bands.

The chamber is designed for nozzles with a length from 21.00mm to 21.25mm and is compatible with most soft and hard hop-up rubber bands without loss of performance.

Test results: the increase in muzzle velocity compared to the original chamber can be from 3 m / s (10FPS) to 9 m / s (30FPS).

The ME and MI chambers are shorter than the older generation TE by 1.25 mm to prevent misalignment of the upper and lower body of the weapon on some AEG models.

The UV LED module now contains 4 UV LEDs instead of the 2 clear LEDs that were in the older generation. They therefore guarantee faster and longer illumination of the bbs. The LED module automatically switches on when firing and switches off when firing is stopped!

Difference between MI SPORT and PRO versions:
The difference is in the bb catch system when the magazine is removed.
Both versions have a bb catch system - the SPORT version has an easier way of catching in the bb shaft using an O-ring, the PRO version has a latch on the bb shaft with a lever to release the bbs caught in the chamber. Other parameters are identical.

Package contains

• 1 x Aluminum CNC Hop-up chamber MI SPORT (with bb catch)
• 2 x Transparent chamber window
• 1 x Aluminum CNC hanger Standard-Hop
• 1 x Aluminum CNC hanger R-Hop
• 1 x Standard-Hop silicone roller
• 1 x R-Hop silicone roller
• 1 x Aluminum CNC concave pressure R-Hop 4.5mm length
• 1 x Aluminum CNC concave pressure R-Hop 6mm length
• 1 x Brass CNC pin
• 1 x CNC Delrin Locking C-Clip
• 1 x Brass CNC centering ring
• 1 x Rubber O-ring
• 3 x Steel spring
• UV LED module for lighting bbs
• Electronics for UV LED module

Parameters

• Overall length: 51mm
• Overall height: 37.75mm
• Outer diameter (mouth for gearbox): min 11mm - max 11.5mm
• Outer diameter (mouth for outer barrel): min 12mm
• Inner diameter (nozzle mouth): max 8.3mm
• Outer diameter (mouth for magazine): min 9.25mm
• Magazine neck length: max 6.25mm
• Material: 6061 aluminum