Bluetooth Leviathan - V2 optical to stock (CNC speed trigger for M4/M16) - JeffTron

Leviathan - V2 optical is one of the most advanced control units on the market. It combines optical and microswitch sensors for better control and durability. The unit has an integrated Bluetooth chip for quick setup using a smartphone (iOS or Android). Leviathan - V2 optical brings endless possibilities for your weapon!

Finished cabling with DeanT connector - no soldering.

Variant with cabling led to the stock.

MAIN FUNCTION

• Optical sensors are used to detect the firing mode and the firing cycle.
• The trigger switch has a pressure of only 0.13 mm to achieve the perfect hair trigger mode
• The unique Real Trigger System (RFTS) with integrated spring simulates the resistance of the trigger as in a real weapon. Adds secondary resistance with trigger reset after firing. The RFTS was designed by a professional rifleman for a more realistic shooting feel
• Adds new firing modes independently for each switch position (SEMI - BURST - AUTO)
• Adjustable dose shooting (range 2 - 20 rounds)
• Preserves empty magazine detection as the original weapon
• Reduction of cadence by up to 40% with a pause between shots. Thanks to this, the shot has a quick response to the press of the trigger, as with a sharp weapon
• Adjustable force of active engine braking with the possibility of switching it off
• Piston pre-loading function for immediate firing in SEMI firing mode (can only be used with the return latch included in the package)
• Shot delay function when you cannot fire again for a certain period of time. It is for simulation of kickback or overcharging (range 0.1 - 4.0 s)
• The electronic fuse sets the sensitivity of the current protection
• Low battery indication for 2S - 4S li-pol and 3S - 4S li-fe
• The virtual magazine simulates low-capacity magazines, when it reaches 0, the weapon stops firing. You can set a warning after each shot when the virtual magazine is almost empty
• There is an input port on the board with functions: 3 morning dose, external trigger, AUG trigger, empty magazine detection, virtual magazine overcharge, etc. And the output pads are used for lighting hop-up chambers, power supply for electric magazine, flashlight, etc.
• The screen with statistics from shooting with current consumption of the engine and the temperature of the mosfet allows you to fine-tune the assembly of the gearbox
• Display of the current cadence of the weapon
• The application displays the current battery voltage. The colored bar indicates its state of charge
• Save parameters to profiles for fast loading
• The update fixes bugs and adds new features for the device
• The error log shows the error history recorded by Leviathan
• For higher security, it is possible to turn off the wireless connection via the firing switch (can be deactivated)
• Leviathan monitors the passing current, voltage and temperature to avoid damage if something bad happens
• It uses engine vibrations and beeps in the stock to alert the user
• The setting change is immediately stored in Leviathan's memory, so programming is not lost when disconnected from the smartphone or battery
• New features are free for every user through an online update feature

SELECTION OF SHOOTING MODES

Independent of switch position (SAFE - SEMI - AUTO)

• SAFE: does not respond when the shutter button is pressed.
• Semi: Fires once when the shutter button is pressed.
• Semi / BurstX: short press fires once, hold fires the selected dose.
• Binary trigger: Fires once when the trigger is pressed and again when the trigger is released.
• BurstX: Fires a dose when the shutter button is pressed.
• BurstX + BurstY: short press fires burstX, long press fires sum burstX + burstY.
• Burst / Full: a short press of the shutter button fires burstX, a long press starts automatic firing.
• Full: the weapon fires until the trigger is released (AUTO).
• Virtual reload: press the virtual stack overload trigger

EXTERNAL INPUT

• Works with input terminal.
• OFF: Any signal on the stage is ignored.
• External trigger: the trigger in the weapon is deactivated and replaced by a microswitch connected to the input (SIG and GND).
• Burst-3 trigger: press the microswitch to take 3 morning doses. The trigger in the weapon is still functional. The microswitch must be connected to the input (SIG and GND).
• AUG trigger: switch detection is deactivated. The trigger in the weapon is set to "selector on semi". Microswitch connected to input (SIG, GND) is set to "selector on auto"
• Empty mag (NO): The microswitch activates empty magazine detection when a SIG with GND is connected.
• Empty mag (NC): The microswitch activates empty magazine detection when a SIG with GND is disconnected.
• Virtual reload: The microswitch overloads the virtual reload when a SIG with GND is connected.

EXTERNAL OUTPUT

• Works with input terminal.
• OFF: the output terminal only works if it is activated by the input terminal.
• Motor: the output terminal is ON with the weapon motor and also when it is activated by the input terminal.
• Motor + Xs: the output terminal is ON with the weapon motor with a time delay after deactivation of the motor and also when it is activated by the input terminal.
• Always on: the output terminal is always on.

TECHNICAL SPECIFICATIONS

• Easy installation inside the V2 gearbox from Tokio Marui
• By removing the bottom part of the board, you can insert the Leviathan-V2 optical into the gearbox from Krytac
• It uses an optical sensor activated by the protrusion of the piston wheel for perfect timing of individual and automatic firing
• An optical sensor is also used to detect the position of the fire switch - it only works with the label supplied with the Leviathan
• The trigger switch has a pressure of only 0.13 mm to achieve the perfect hair trigger mode
• The unique Real Trigger System (RFTS) with integrated spring simulates the resistance of the trigger as in a real weapon. Adds secondary resistance with trigger reset after firing. The RFTS was designed by a professional rifleman for a more realistic shooting feel
• Thanks to advanced electronics, the Leviathan - V2 optical can be used in a weapon with any common upgrade and cadence, including DSG wheels.
• Complete cabling allows quick and easy installation in the weapon, it is long enough for all types of weapons with a battery in the back. There is no need to solder anything
• The length of the wires between the end of the gearbox and the connector is 290 mm
• Power conductors are 1.5 mm2 (AWG16) with thin and rigid MPPE insulation, blue 0.34 mm2 (AWG22) with MPPE insulation
• The power conductors have an outer diameter of only 2.06 mm and a blue 1.24 mm
• Encapsulated in a varnish that protects the equipment against water damage
• On the board there is an input port for controlling the output port, 3 morning dose, external trigger, magazine overcharging, etc. And the output port is used for lighting hop-up chambers, power supply for electric magazine, flashlight, laser, etc.
• For the pre-cocking function to function properly, it is necessary to have a functional reversing latch in the gearbox. WARNING: increases the wear of the parts in the gearbox.
• Designed for all types of commonly used batteries up to 17 V (Ni-xx 8.4 - 12V, lipol 7.4 - 14.8V)
• The device increases the cadence of the weapon and the endurance of the battery compared to the original cabling in the weapon
• With active engine braking, the piston is not partially extended during firing, the spring is not tired by partial compression, the internal parts are not stressed
• For high-cadence weapons, active braking solves the problem of multiple shots in semi-firing mode.
• The braking effect of the motor is strongest with a load motor with neodymium magnets
• Remove from the gearbox: the interrupter, the trigger, the trigger contacts and the trigger stop - with the Leviathan - V2 optical you will not need them.

Leviathan - V2 optical can be installed in these airsoft guns

• M4, M16, HK416, AR15 with gearbox V2 according to TM standard
• SR25 with gearbox V2 according to TM standard
• MP5 with gearbox V2 according to TM standard
• G3 with gearbox V2 according to TM standard
• M249 with gearbox V2 according to TM standard
• M4 from Krytac
• M107 BARRETT from Snow Wolf
• and other possible ...

Leviathan - V2 optical is not compatible

• KWA gearbox V2.5
• S&T or Arcturus gearbox V2
• ICS SSS gearbox V2
• Ares Amoeba gearbox V2
• G&G G2 gearbox V2
• APS silver edge gearbox V2
• Gearbox V2 with microswitch
• and other possible ...

PACKAGING

• Leviathan - V2 optical electronic module with stock cabling
• CNC trigger with adjustable operation (various types)
• Screw for securing the device in the gearbox
• Foam to secure the device in the gearbox
• Leaf with stickers on the backdrop
• Black Leviathan 40 mm sticker
• Installation instructions

SAFETY WARNINGS

• To install the device in a gearbox, you must have technical knowledge!
• Please read and follow all instructions to avoid damaging the device.
• A short circuit or incorrect connection of the battery will cause immediate damage to the device, which is not covered by the warranty. It can also ignite or explode the battery!
• Disconnect the battery when not in use! Otherwise, you will completely discharge the battery. The device still draws a small amount of current.
• Do not connect the battery if the weapon is aimed at you, another person or an animal!
• Do not modify, repair, prevent spillage or heat shock Leviathan - V2 Optical.